Saturday, September 23, 2006

2006 F3B Gliding Nats

Not much new in the way of designs.
Slideshow of more photos here.
Malcolm's inside story here.

Friday, September 15, 2006

Tuesday, September 12, 2006

Wednesday, September 06, 2006

Tuesday, September 05, 2006

Info on 2006 Gliding Nats -- Evan Shaw

Entry form here
Program here
Directions to Groengoud field here
(All pdf files)

Ventus 2ax maiden flight at Rosendal-- Mike May

(Photo by Charl Viviers)

Hi all,
Some feed back on the maiden flight of the VENTUS 2 AX, after some minor setbacks (the captive nut that holds the tailplane on fell down into the fuse) this was built-in so some minor surgery was required to reposition it and epoxy in place. A check over by Norbert also revealed slop in the flaps (damaged splines on the control horns) these replaced and we were good to go. At 15.00 we moved to the cliff edge and did another round of preflight checks, with my heart in my mouth I called launching and immediately noticed the spectators fell absolutely silent. With Evan , Don King and Norbert holding things steady Evan gave 3 2 1 count down and a mighty heave. The aircraft nosed over and down I let it gain speed touched left and right to check on control authority and fed in some up , the glider levelled out and started gaining altitude in the lift band , the crowd errupted and I took a deep breath W.O.W. . The VENTUS was then gently flown for thirty minutes and required no additional trimming. The landing was textbook smooth barring a small scare as I crossed a line of small trees on the approach, a photo shoot followed with lots of handshaking etc. I really would like to sincerely thank all the people who gave valuable assistance with the build, de-snagging and first flight, most notibly EVAN SHAW who followed day to day the project and kindly cut the blue foam cores, PIET and CHARL from B.E.R.G, NORBERT whose large scale gliders at Volksrust started this inspiration. DON KING who I noticed holding the wing on launch and the tall fellow from the Eastrand who kindly led me back up the hill while focused on the plane whose name I dont know. A BIG THANK YOU ALL.

STATISTICS
WINGSPAN 5.1 MTS
WING AREA 118 DM SQ
FLYING WEIGHT 8KG
WING JOINER 18 MM CARBON ROD
WINGS BLUE FOAM BAGGED WEIGHT 1.8KG EA

For the record I used 6 ltr of epoxy resin
500 pairs of latex gloves
Built it without plans, on the garage floor in 8 weeks including fuselage plug and moulds

For me the highlight of my model gliding career was that first flight off Rosendal. The VENTUS will now be fitted with an onboard video and vario with the intention of getting airborn film footage of raptors, vultures and any other thermalling birds that come close watch this space.

Regards
MIKE MAY
B.E.R.G

Blog Archive

Total Pageviews

Followers

Web site terms and conditions

Copyright of material on all the pages of this site is vested in the SAMAA or the original authors. You may use the material in terms of the Creative Commons license for non-commercial purposes on the condition that you acknowledge its origin.

This work is licensed under a Creative Commons License

The views expressed on this web site, or on any directly or indirectly linked site, are not necessarily those of the SAMAA Committee, or the web editor. The information provided on this site is provided for recreational purposes only. The SAMAA and the authors of presented content assume no liability whatsoever on the use of information contained in this site. The information on this site is provided on an "as-is" basis, without warrantee of any kind. Links provided on this site will let you leave the SAMAA web site. The linked sites are not under the control of the SAMAA, and the SAMAA is not responsible for the contents of any linked site, or any link contained within a linked site, or updates to such sites.